Products

0835 Cross-Linkable Semi-Conductive Outer Shielding Compound Insulation

0835 Cross-Linkable Semi-Conductive Outer Shielding Compound Insulation
0835 Cross-Linkable Semi-Conductive Outer Shielding Compound Insulation 0835 Cross-Linkable Semi-Conductive Outer Shielding Compound Insulation 0835 Cross-Linkable Semi-Conductive Outer Shielding Compound Insulation 0835 Cross-Linkable Semi-Conductive Outer Shielding Compound Insulation
Product ID :
0835
Product Attributes :

Description:

0835 cross-linkable semi-conductive shielding compound is used as strippable insulation shield for cross-linked polyethylene insulation power cable rated voltage up to 35KV. It's suitable for high temperature vulcanization processing method. 0835 provides excellence processability, fine surface smoothness, stable volume resistivity, low pre-cure or scorch characteristic, lower stripping force with anti-tearing property, leaving clean surface for insulation after stripped.  

Product Description

1.Description:

0835 cross-linkable semi-conductive shielding compound is used as strippable insulation shield for cross-linked polyethylene insulation power cable rated voltage up to 35KV. It's suitable for high temperature vulcanization processing method. 0835 provides excellence processability, fine surface smoothness, stable volume resistivity, low pre-cure or scorch characteristic, lower stripping force with anti-tearing property, leaving clean surface for insulation after stripped.  
                 
2.Packing:In Cardboard Box with inner PE bag, 600kg/box.

3.Technical Parameter

Property

Test Method

Unit

Value

Density at 23°C

ASTM D 1505

g/ cm3

≤ 1.13

Tensile Strength (200 mm/min)
Tensile Strength Retention
(Heat Aging at 135°C after 168h)

ASTM D 638

MPA
%

≥ 13
85

Elongation at Break before ageing
Elongation Retention
(Heat Aging at 135°C after 168h)

ASTM D 638

%
%
 

280
85

Volume Resistivity at 20°C
Volume Resistivity at 90°C

ASTM-D991

W.cm
W.cm

60
≤ 600

Hot Set Test Conditions
At 200 ±2 °C x 0.2 MPa for 15 min

IEC 540-14

 

 

Elongation after loading
Permanent Deformation

 

%
%

≤ 60
≤ 2

Moisture Content

KARL FISCHER

ppm

≤ 500

Brittleness Temperature

ASTM-D746

 

-40°C

Stripping Force

Q/TNYM 1-2012

N/cm

15


4.Processing Conditions: 
The recommended standard extrusion temperature profiles are as followings: Unit: °C

Zone

Zone 1

Zone 2

Zone 3

Zone 4

Flange

Tube

Screw

Temperature Range°C

80-85

90-95

100-105

105-110

105

105

50-55

We suggest using double layer filter mesh with size 40 mesh (350μm).
We recommend hopper drying at 40~60'C for 4 hours to remove moisture before extrusion.

5.Storage:

Should be stored at room temperatures between 10~30°C. Recommended maximum storage period in dry and clean are is 12 months unopened and in original packaging after the manufacture.

Online Inquiry